Note that purchasing a Tuxera NTFS for Mac provides you with free Tuxera disk manager software which can control all the drives in Mac. If you do not want to spend much and yet wish to get the best app, go for Mounty. It creates room on Mac to be able to maintain, write and read files which are stored in NTFS drives.
The feature introduced by Apple in El Capitan prevents the use of third-party software in Disk Utility. Advanced features such as formatting or repairing drives are only accessible through command line. If you wish to erase in your drive in NTFS format, or run maintenance tasks in your drive, you should use Tuxera Disk Manager. Tuxera Disk Manager is included with the installer of Tuxera NTFS for Mac (version 2015.1 and higher) and can be found in the Applications folder, or launched from System Preferences Tuxera NTFS for Mac Volumes tab Disk Manager.
Alternatively, you can use the command line utility diskutil (a command line version of Disk Utility), specifying the file system type 'Tuxera NTFS'. Just typing the diskutil command in a terminal window prints a brief help text.
The most common reason why Tuxera NTFS for Mac doesn’t mount an NTFS volume is that it contains errors or inconsistencies. These problems can occur if you detach a hard drive from a computer without unmounting it first (“Safe remove hardware” in Windows, the eject button next to the volume in Mac OS X). They can also occur if your operating system crashes, or if your computer otherwise shuts down abnormally. If you are using El Capitan, refer to upper section: “How to erase and repair NTFS drives in El Capitan?” For OS X 10.10 Yosemite and older OS X versions: To recover from this situation, please open Disk Utility as seen below, click on the target volume on the left hand panel, click on “First Aid” tab, and finally click “Repair Disk” at the bottom right corner. Observations:. This feature is available only in release 2012.3.1 and newer. Please update your software if needed.
In some cases Mac OS X will not let you to run chkdsk from Disk Utility. If that occurs, please first open “Terminal” and execute the following commands: sudo diskutil unmount force diskXsY sudo /System/Library/Filesystems/fusefstxantfs.fs/Support/ntfsck /dev/diskXsY (where diskXsY is the disk identifier that can be seen by clicking Disk Utility’s “Info” button) Alternatively, attach the drive to a Windows computer and run ‘chkdsk /f’ on the drive to repair any problems in its internal structures. See for usage information regarding ‘chkdsk’. Tuxera NTFS for Mac includes an update feature, available from System Preferences Tuxera NTFS Updates tab. This feature checks for updates and if a newer version is found, you can install it with a single click. The Update feature is available from Tuxera NTFS for Mac version 2015 onwards.
If you are using an older version, follow these instructions: First of all, download the latest installer by visiting Tuxera NTFS for Mac product page: Click on the “Download” button and you will get the latest installer. Once downloaded, just execute it and follow the instructions to get your software up to date. You don’t need to uninstall the previous version.
This is a common issue. Windows has an artificial limitation which prevents it from accessing other partitions than the first one on any media that it recognizes as a removable drive (such as a USB flash drive). When partitioning a disk using GUID Partition Table in Mac OS X, the partitioning utility creates a hidden partition before the first usable one, a 200 MiB EFI partition (as per the EFI specification). Thus Windows will only be able to see the very first hidden 200 MiB EFI partition, which is protected and cannot be used anyway. When a user tries to reformat such a removable drive in Windows, the formatting utility will only allow reformatting the inital 200 MB EFI partition as FAT32/16, not making the entire flash drive available for formatting. One solution is to repartition and reformat the USB flash drive with the MBR (Master Boot Record) partition scheme:. Make sure that the data on the USB flash drive is backed up as everything will be erased!.
Open up Disk Utility (Applications-Utilities-Disk Utility). Select your USB flash drive. Select the ‘Partition’ tab and ‘1 Partition’ (Windows does not support multiple partitions on USB flash drives) with the format ‘Windows NT Filesystem (Tuxera NTFS)’. Select ‘Options’. Select ‘Master Boot Record’.
Click ‘Apply’ to erase and repartition your USB flash drive. Apple does not allow any volumes that are mounted with third party file system drivers to appear in the “Startup Disk” preference pane. This is hard coded, and something that we cannot change. However, there are numerous alternative methods for booting into Windows:. Hold down the Option key during boot (or Alt for non-Apple keyboards). This brings up a boot menu where you can choose which volume to start your computer from.
Install the for better control of the boot process. Disable Tuxera NTFS for Mac (using the preference pane), unmount your NTFS volume with Disk Utility and mount it again. Your volume will now be mounted with Apple’s read-only NTFS driver, and the “Startup Disk” preference pane will behave as usual.
Make sure to reenable Tuxera NTFS for Mac afterwards. Use the command line utility bless to set the disk that should be used as default startup disk (see man bless for more information). Tuxera NTFS for Mac is very easy to uninstall.
Please go to: System Preferences - Tuxera NTFS - General. Press the button “Uninstall Tuxera NTFS” If this fails for some reason, you can also run the uninstall script. You’ll need administrator rights to uninstall the software; using “sudo” in Terminal will require you to input the administrator password. If you are running Tuxera NTFS for Mac 2015 or a higher version: sudo /Library/Filesystems/fusefstxantfs.fs/Contents/Resources/Support/uninstall-package.sh If you are running Tuxera NTFS for Mac 2014 or an older version: sudo /System/Library/Filesystems/fusefstxantfs.fs/Support/uninstall-package.sh Please note that you will need administrator rights to uninstall the software. If you are using El Capitan, refer to upper section: “How to erase and repair NTFS drives in El Capitan?” For OS X 10.10 Yosemite and older OS X versions: Please open Disk Utility as seen above, click on the target volume on the left hand panel, click on “First Aid” tab, and finally click “Repair Disk” at the bottom right corner. Observations:. This feature is available only in release 2012.3.1 and newer.
Please update your software if needed. In some cases Mac OS X will not let you to run chkdsk from Disk Utility. If that occurs, please first open “Terminal” and execute the following commands: sudo diskutil unmount force diskXsY sudo /System/Library/Filesystems/fusefstxantfs.fs/Support/ntfsck /dev/diskXsY (where diskXsY is the disk identifier that can be seen by clicking Disk Utility’s “Info” button). Error -36 is a very general error and can mean lots of different things. Here are the most common causes of error -36:. Some of the filenames that you’re trying to copy are too large to be copied to the NTFS volume. This can sometimes happen with filenames with 200+ characters that contain “international” characters (i.e.
Characters that lie outside the normal US/English character set). Your drive has internal inconsistency issues. In this case you should get error messages in your system.log file.
This problem is fixed by running ‘chkdsk’ in Windows as described above. Your drive has bad sectors. This should normally also trigger error messages in system.log.
‘chkdsk’ in Windows is often able to discover and mark these bad sectors if you supply the ‘/r’ parameter. If you have bad sectors on your hard drive, you should rescue your data and replace your drive as soon as possible. We have written a special application for this purpose which can be downloaded here: Updated 2009-12-31 (version 1.1): Improved Snow Leopard support and fixes for temporary GUI lockup bugs when extracting.
Usage instructions:. Download and open the disk image (see above). Start the application by double clicking the icon “Extract NTFS metadata” inside the attached disk image. Select the device that your NTFS volume resides on (you can look this up in Disk Utility’s “Info” window).
Make sure that the volume that you’re trying to extract metadata from is not mounted (i.e. Unmount it in Disk Utility). Press the “Extract metadata” button. Specify an output filename in the following save file dialog. Authenticate as an administrator to allow the metadata cloning utility to gain access to the disk device.
Faq Ntfs For Mac Mac
Now the program will start cloning the device metadata to the specified file. The developers are using VMware virtual machines stored on NTFS volumes in the development process without problems. VirtualBox and later versions of Parallels Desktop are also reported to work well. In general there is no reason that it should not work properly. Remember that you cannot simultaneously use an NTFS formatted Boot Camp volume in Mac OS X and your virtual environment. The virtual machine needs exclusive access to the NTFS drive. This is true for all file systems and not specific to NTFS.
When using the default Apple Filing Protocol (AFP) for sharing files from your Mac, writable volumes that are not HFS+ or ZFS formatted will not be accessible from remote computers. This is a built-in and hard coded limitation of the AppleFileServer, and as far as we know there is no way to make third party writable file systems work with the AFP server. (The same problem occurs when attempting to share FAT32 volumes.). A workaround is to share files using the SMB/CIFS (Windows sharing) protocol instead (works for OS X 10.4, 10.5 and 10.6):. Open up System preferences (Apple menu-System preferences). Select ‘Sharing’.
Select ‘File Sharing’. Select ‘Options’. Deselect the option ‘Share files and folders using AFP’ and instead select the option ‘Share files and folders using SMB (Windows)’ and select which users should have access. Click ‘Done’. Your NTFS (and FAT32) volumes should now be accessible from other computers.
OS X 10.7 and 10.8: Mac OS X Lion includes a new SMB/CIFS server called smbx. Unfortunately this closed-source replacement for Samba doesn’t allow any other volumes than HFS+ volumes to be shared. It returns an error when you attempt to access any shares that are on NTFS, FAT32, exFAT volumes. This issue has been fixed in OS X 10.9 onwards. Spotlight is the integrated search tool in Mac OS X systems. When a volume is indexed by Mac OS X, any search within it, is faster.
However, Apple documentation doesn’t provide enough information about how Spotlight indexes drives formatted with file systems different from HFS+ (Mac OS X Extended). Mac OS X—depending on the exact version—will automatically turn on or turn off indexing in an NTFS drive. By default indexing an NTFS drive makes the system slower. Oftentimes users complain about seeing high CPU usage, and they end up disabling the option. That’s why we recommend you to enable Spotlight search on your drive only when you really need it, and keep it disabled otherwise.
In order to enable index/search for a NTFS drive you must follow two steps: First step: Make sure Spotlight has not excluded your drive to search. Go to: System Preferences / Spotlight / Privacy.
If your drive is in the list, remove it using the button “-“. Second step: Enable indexing. Launch “Terminal” (Applications - Utilities - Terminal), and execute the command: mdutil -i on /Volumes/ where is the name of the NTFS volume. Tip: You can always check the current status with the following Terminal command: mdutil -s /Volumes/.
Use of Time Machine® software requires the drive to be reformatted to HFS+ (which is native Mac OS X file system). Therefore, an NTFS drive can’t be used by Time Machine.
Unfortunately this is a limitation that no additional program can solve. Alternatively, the drive can be partitioned into a Mac volume (HFS+) and a Windows volume (NTFS). This resulting drive would be both a backup drive for Mac OS X and a data exchange drive with NTFS. Warning: It is recommended that you copy all the valuable data to another hard drive before formatting.
Frequently Asked Questions about Captain Nemo Should you have any questions that are not answered here, please don't hesitate to contact. Captain Nemo for Windows 95 to Windows 10 Captain Nemo for DOS The above questions and answers apply also to Captain Nemo for DOS, with the exception that the DOS version only supports Novell Netware. Captain Nemo doesn't see my Novell/NTFS/Linux/XFS/HFS+/APFS Partition. Make sure that the foreign drive is jumpered correctly and that is was detected by the BIOS.
You must have administrator rights to access the partitions. In Vista or above, User Access Control (UAC) must be switched off or you right-click the program icon and choose 'Run as Administrator'. Refer to the products page to determine whether your drive's file system is supported by Captain Nemo. The software relies on an intact file structure, e.g. If your drive had any problems in a server environment recently, Captain Nemo most likely will also not be able to mount the drive.
If all the above doesn't apply to your drive, please contact our, we will try to help. Which Novell/NTFS/Linux/Mac versions does Captain Nemo support? Captain Nemo supports Novell Netware 3.xx, 4.xx and 5.xx, Windows NTFS, and Linux EXT2/EXT3/EXT4, XFS, and Apple Mac HFS+, APFS.
Can I write to a Novell/NTFS/Linux drive with Captain Nemo? No, we find it too dangerous to allow write access to the foreign partitions, therefore the Novell/NTFS/Linux file systems are read only. While mounting/copying a drive with Captain Nemo I get a runtime error. We are always very interested in runtime errors! Please write down the error no. And email it to us at along with your system configuration and a description of what you were doing when the error occurred. We will try to solve the problem.
While copying Linux files I get the message 'File already exists.' The Linux file system features upper and lower case file names. It might happen that the first 'file' is copied to the Windows file system and the second 'FILE' is also copied over.
Faq Ntfs For Mac Pro
Windows doesn't distinguish between lower and upper case therefore in windows these files are exactley the same file. Does Captain Nemo support compressed files/long file names? Yes, versions 3.10 and up now can handle compressed files and long file names.
Mounting a Novell/NTFS/Linux drive with Captain Nemo takes hours. Mounting time can vary, depending on the size of the drive. But hours are not normal. Captain Nemo is supposed to mount the foreign drives in minutes not hours. If you are using the Windows version of Captain Nemo to mount a Novell drive, try the DOS version, this sometimes helps.
Otherwise please contact our Technical Support Department and we will gladly try to assist you. Why should I register Captain Nemo?
The shareware version of Captain Nemo allows you to see the files on your Novell/NTFS/Linux drive. In order to copy these files to a Windows or DOS computer you have to register the software. Registered users are also eligible for free updates and technical support.
If I want to use the DOS version do I have to register again? No, you don't have to register again. No matter which version you register - the Windows or the DOS version of Captain Nemo - the license key is valid for both. Do I have to pay for updates? No, updates of Captain Nemo are always free for registered users. You can download the latest version on our website and register it with your license key. Do you offer any rebates?
Yes, we offer rebates for everyone purchasing two or more copies of our software. Just contact us by e-mail or phone to learn about our current rebate conditions.