. Jump to:. The AVO-9 series of pulsed laser diode drivers are ideal for use with ultra-fast laser diodes from Lumics, Qphotonics, Fitel, Fujitsu, Mitsubishi, Bookham, Ulm Photonics, Nichia, and others. Each AVO-9 pulsed laser diode driver includes a customized high-speed socket for the user's diode, offering ease of use without noticeably degrading performance! The AVO-9H1 series operates to 2A, for pulse widths of 10 to 500 ns, at repetition rates to 200 kHz. The rise times are less than 1.2 ns.
The pulsed laser diode driver 1102 is an integrated circuit or chip comprising switches M1, M2, gate drivers 1106 a-b, and a switching timing controller 1104. Switches M1, M2, gate drivers 1106 a-b, and a switching timing controller 1104 are provided on the same substrate.
Pulsed Laser Diode Module
The AVO-9 series is often adapted to meet special requirements. Contact the factory with your requirements! The most recent information for the AVO-9H1-B Laser Diode Driver (Pulsed Voltage) is available here:.
The following manuals for the AVO-9H1 family (possibly including customized models) are available online:. Customized special-order model number. Customized special-order model number. This is a generic programming manual for all Avtech instruments. It may describe some features and modes that are not used in the AVO-9H1-B.
Prices - USA and Canada Standard US/Canada prices are listed below. Base Model P/N Price Notes Laser Diode Driver (Pulsed Voltage) AVO-9H1-B $10498 Base model. Units with the -B suffix include the and a 2m/6ft GPIB cable. Polarity Options Positive output polarity -P 0 A polarity must be specified. Negative output polarity -N 0 A polarity must be specified. Accessory Kits Accessory kit (low-dB attenuators) -AK11 $333 Option. Consists of four SMA, 18 GHz, 2 Watt attenuators (3, 6, 10, 20 dB) Accessory kit (attenuators and terminators) $887 Option.
Consists of one SMA 12 GHz 20 Watt attenuator (20 dB) and two SMA 18 GHz 2 Watt attenuators (10 & 20 dB) for use on the output, and two 50 Ohm, 1 GHz, 1 Watt feed-through terminators (one SMA, one BNC) for use on external trigger inputs. Accessory kit (adapters and short coaxial cables) $348 Option. Consists of one 12-inch SMA-M/SMA-M hand-formable coaxial cable with solderable jacket, one 12-inch SMA-M/SMA-M RG-316 coaxial cable, one 36-inch SMA-M/SMA-M RG-316 coaxial cable, one 24-inch SMA-M/BNC-M RG-316 coaxial cable, one 36-inch BNC-M/BNC-M RG58C/U coaxial cable, one SMA-F to BNC-M adapter, one SMA-M to BNC-F adapter, one SMA-F to SMA-F adapter, and one SMA-F to solder cup adapter. Connectivity Options Ethernet port, for remote control using VXI-11.3, ssh, telnet, and web $898 Option. Adds a rear-panel Ethernet connector, allowing the instrument to be remotely controlled using the VXI-11.3, ssh (secure shell), telnet, and http (web) protocols. In particular, the VXI-11.3 features allows software like LabView to control an instrument using standard VISA communications drivers and network cabling, instead of using old-style GPIB cabling.
(This eliminates the need for a GPIB controller card and its proprietary drivers.) Extra Documentation Provide a Certificate of Conformance -CC1 $0 Option. Provide an installed IUID-format label -ID1 $0 Option.
Does not include data registration. Records the manufacturer CAGE code, the instrument serial number, and the model number.
High-Speed Socket Type Socket for 3-pin 5.6mm or 9mm package with 2.54mm pin circle diameter (generic).P0 $0 Option. Estimated price only. Contact Avtech with the package's mechanical drawings and pinout information. Socket for 2-pin 5.6mm or 9mm package with 2.54mm pin circle diameter.P0C $0 Option.
Specifies this common diode configuration: The socket will accept a 2-pin 5.6mm or 9mm package, with a 2.54mm pin spacing and pin diameters of 0.38-0.56 mm diameter (15-22 mils). The positive pulse signal will be applied to the anode pin. The cathode pin will be grounded. The diode parasitic resistance (dV/dI at lasing) must be 3V).
Pulsed Laser Diode Driver For Mac Os
Pulsed Laser Diode Driver For Mac Pro
Socket for 2-pin 5.6mm package with 2.0mm pin circle diameter.P2C $0 Option. Specifies this common diode configuration: The socket will accept a 2-pin 5.6mm package, with a 2.0mm pin spacing and pin diameters of 0.38-0.56 mm diameter (15-22 mils). The positive pulse signal will be applied to the anode pin. The cathode pin will be grounded. The diode parasitic resistance (dV/dI at lasing) must be.